============================================
Companion Premier Incline Platform Lift
============================================

The Companion Premier platform lift has been designed to accommodate a small change in floor levels. It is for use on stairs with an incline angle between 20 and 45 degrees. 

Features:
Travel - To a height of 2880mm

Load Capacity - 150kg

Power - Runs on a 240 volt single phase power supply as standard

Platform Size - 900mm long x 760 wide

Applications - Indoors or outdoors

Operation - Electro-hydraulically operated, with soft start and stop and mechanically and electrically interlocked barrier arms

Safety - Automatically lowering at the appropriate landing to form an access ramp. Mechanically operated ramps, which form wheel stops when the lift is in motion

--------------------------------------------

Performance and Dimensions:

Rated load
150kg
 
Maximum travel (vertical)
2880mm
 
Lift speed
0.1m/s
 
Platform width
760mm
 
Platform length
900mm
 
Depth to wall folded
270mm
 
Floor area required at lower level
1500mm x 970mm
 
Power pack location
Within 5m of lift
 
Headroom required
1850mm
 
Lift controls
Light touch 'hold to run' buttons
 
Power supply
240v, single phase, 10amp fused isolator
 
Control voltage
240v via transformer
 
Paint finish
Finished in light grey enamel paint
 
General
Light touch "hold-to-run" controls
Internal and external application
Easy to relocate for a left or right hand stairway
Vertical storage and lowering of platform is manually operated
 
Fully complies with:
BSEN 6440:1999
ISO DIS 9386
BS5776(1)